ZyXEL Communications 4528F Manuel D’Utilisation
Chapter 52 ARP Table
XGS-4526/4528F/4728F User’s Guide
452
52.2 The ARP Table Screen
Click Management > ARP Table in the navigation panel to open the following
screen. Use the ARP table to view IP-to-MAC address mapping(s) and remove
specific dynamic ARP entries.
screen. Use the ARP table to view IP-to-MAC address mapping(s) and remove
specific dynamic ARP entries.
Figure 243 Management > ARP Table
The following table describes the labels in this screen.
Table 168 Management > ARP Table
LABEL
DESCRIPTION
Condition
Specify how you want the Switch to remove ARP entries when you click
Flush.
Flush.
Select All to remove all of the dynamic entries from the ARP table.
Select IP Address and enter an IP address to remove the dynamic entries
learned with the specified IP address.
learned with the specified IP address.
Select Port and enter a port number to remove the dynamic entries
learned on the specified port.
learned on the specified port.
Flush
Click Flush to remove the ARP entries according to the condition you
specified.
specified.
Cancel
Click Cancel to return the fields to the factory defaults.
Index
This is the ARP table entry number.
IP Address
This is the learned IP address of a device connected to a Switch port with
the corresponding MAC address below.
the corresponding MAC address below.
MAC
Address
Address
This is the MAC address of the device with the corresponding IP address
above.
above.
VID
This field displays the VLAN to which the device belongs.
Port
This field displays the port to which the device connects. CPU means this
learned IP address is the Switch’s management IP address.
learned IP address is the Switch’s management IP address.
Type
This shows whether the MAC address is dynamic (learned by the Switch) or
static (manually entered in the Static MAC Forwarding screen).
static (manually entered in the Static MAC Forwarding screen).