Konica Minolta 211 Manuel D’Utilisation
7
Network settings
7-38
IC-206
2
Type in the port number.
–
A port number between 1 and 65535 can be specified. Normally,
port number 389 is used. If SSL is enabled, use port number 636.
port number 389 is used. If SSL is enabled, use port number 636.
3
Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu
appears again.
appears again.
Selecting the SSL setting
1
In the “LDAP SETTING” menu, press the [+] or [,] key until “SSL SET-
TING” is selected, and then press the [OK] key.
TING” is selected, and then press the [OK] key.
2
Press the [,] or [+] key until “DISABLE” or “ENABLE” is selected, and
then press the [OK] key.
then press the [OK] key.
Whether “DISABLE” or “ENABLE” is selected, the message “ACCEPT-
ED” appears, and then the “LDAP SETTING” menu appears again.
ED” appears, and then the “LDAP SETTING” menu appears again.