Konica Minolta 211 Manuel D’Utilisation

Network printing

IC-206

3-15

Specify the settings necessary for connecting the computer and this ma-
chine over the network and sending a print job through the network from the 
computer.

The following connection procedures are described in this section.
-

Peer-to-peer printing

–

Windows 98 SE/Windows Me

-

LPR printing

–

Windows 2000

-

PORT9100 printing

–

Windows 2000/Windows XP/Windows Server 2003/Windows Vista

-

IPP printing

–

Windows 2000/Windows XP/Windows Server 2003/Windows Vista

-

Connecting the NetWare server and this machine

–

Specifying the NetWare 4.x/5.x/6 print server mode settings

–

Specifying the NetWare 4.x/5.x/6 remote printer mode settings

–

Specifying the NetWare 5.x/6 Novell Distributed Print Service (NDPS) set-
tings

–

Specifying print settings for the NetWare client (Windows)

Compatible operating systems: Windows 98 SE/ Windows Me

2

Before specifying settings, check that the following preparations have 
been completed.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.

(For details on installing the PCL driver, refer to “Installing the printer driv-
er by using the Add Printer Wizard” on page 2-15. If the GDI driver is to 
be installed, refer to the User’s Guide for the GDI printer controller, in-
cluded with this machine.)

On the Start menu, point to “Settings”, and then click “Printers” to 
open the Printers folder.

Right-click the icon for the installed printer.

Click “Properties” to open the Properties dialog box.