Alcatel Carrier Internetworking Solutions 6300-24 Manuel D’Utilisation
SNMP Commands
4-109
4
snmp-server community
This command defines the community access string for the Simple Network
Management Protocol. Use the no form to remove the specified community string.
Management Protocol. Use the no form to remove the specified community string.
Syntax
snmp-server community string [ro|rw]
no snmp-server community string
no snmp-server community string
• string - Community string that acts like a password and permits access to
the SNMP protocol. (Maximum length: 32 characters, case sensitive;
Maximum number of strings: 5)
Maximum number of strings: 5)
• ro - Specifies read-only access. Authorized management stations are only
able to retrieve MIB objects.
• rw - Specifies read/write access. Authorized management stations are able
to both retrieve and modify MIB objects.
Default Setting
• public - Read-only access. Authorized management stations are only able to
retrieve MIB objects.
• private - Read/write access. Authorized management stations are able to both
retrieve and modify MIB objects.
Command Mode
Global Configuration
snmp-server location
Sets the system location string
GC
snmp-server host
Specifies the recipient of an SNMP notification operation
GC
snmp-server enable traps Enables the device to send SNMP traps (i.e., SNMP
notifications)
GC
show snmp
Displays the status of SNMP communications
NE, PE
snmp-server
Enables the SNMPv3 server
GC
snmp-server engineID
Sets the SNMPv3 engine ID
GC
show snmp engineID
Shows the SNMPv3 engine ID
PE
snmp-server view
Adds an SNMPv3 view
GC
show snmp view
Shows the SNMPv3 views
PE
snmp-server group
Adds an SNMPv3 group, mapping users to views
GC
show snmp group
Shows the SNMPv3 groups
PE
snmp-server user
Adds a user to an SNMPv3 group
GC
show snmp user
Shows the SNMPv3 users
PE
Table 4-38. SNMP Commands
Command
Function
Mode
Page