Acer 08P4100 Manuel D’Utilisation

Overview

6-2

Manual No. 775079

• In order for UnixWare 2.1.2 and below to detect a Mylex multifunction 

controller such as a DAC960PG, DAC960PJ, DAC960PR, 
DAC960PT, etc., UnixWare 2.1.2 and below must have a 
“multifunction PCI Driver” loaded.

• In order to install a Mylex multifunction controller, a driver diskette 

must be created from the CD-ROM. See “Creating a Driver Diskette 
for UnixWare” on page 6-3. 

• If using a Mylex multifunction controller as a primary controller

1

, 

please refer to “Installing the Mylex Disk Array Controller as the 
Primary UnixWare Controller with UnixWare 7.x/2.1.3” on page 6-3.

• If using a Mylex multifunction controller as a secondary controller

2

, 

please refer to “Installing the Mylex Disk Array Controller as the 
Secondary UnixWare Controller with UnixWare 7.x/2.1.3” on page 6-
5.

• If using a Mylex multifunction controller as a primary controller, 

please refer to “Installing the Mylex Disk Array Controller as the 
Primary UnixWare Controller with UnixWare 2.1.2” on page 6-6.

• If using a Mylex multifunction controller as a secondary controller, 

please refer to “Installing the Mylex Disk Array Controller as the 
Secondary UnixWare Controller with UnixWare 2.1.2” on page 6-8.

1. “Primary” indicates that a controller’s storage device will be the 

boot device for UnixWare installation.

2. “Secondary” indicates that the controller is not the bootable 

device for the UnixWare operating system.