ADC MM702G2 Manuel D’Utilisation
Chapter 7: Implementing a Point-to-Point LAN Extension
7-4
Configure the Remote WAN
Step
Action
1
Select WAN on the menu bar to access the WAN Configuration page (
Figure 7-4. WAN Configuration
2
Select RFC 1483 bridged from the WAN Configuration page to display the following page (
).
Figure 7-5. RFC1483 Bridged Session
3
In the Session Name box, assign a name to this session.
4
In the Virtual Path ID (VPI 0 - 4,095) box, enter the Virtual Path ID. This must match the Virtual Path ID
of the Central-Office modem.
of the Central-Office modem.
5
In the Virtual Channel ID (VCI 32 - 65,535) box, enter the Virtual Channel ID. This must match the
Virtual Channel ID of the Central-Office modem.
Virtual Channel ID of the Central-Office modem.
6
Click Apply.