ADC MM702G2 Manuel D’Utilisation

Chapter 7: Implementing a Point-to-Point LAN Extension

7-9

After you have performed each of the previous configuration changes, verify back-to-back communication by 
passing traffic over the WAN session. For example, set up a PC on the LAN-side of the Remote modem and another 
PC on the LAN-side of the Central-Office modem. Then, transfer a file or ping between the two PCs. This generates 
traffic and tests connectivity.

5

Select Save Changes on the menu bar to access the Save Changes page.

6

Click Save to save the configuration to flash memory.

1

On the front panel of one of the modems, check the status of the SYNC LED. If it is blinking, it is 
attempting to establish communication with the other modem. If it is on solid green, it has already 
synchronized its connection with the other modem. See 

 for further 

definitions of LEDs indications.