Adder Technology EPS-M8 Manuel D’Utilisation

Page de 115



Global user (IP network port)
The.AdderView.CATx.IP.models.
provide.an.autosensing.Ethernet.
IP.port.that.can.operate.at.10.or.
100Mbps,.according.to.the.network.
speed..The.AdderView.CATx.IP.
models.are.designed.to.reside.quite.
easily.at.any.part.of.your.network:.
•. They.can.be.placed.within.
the.local.network,.behind.any.
firewall/router.connections.to.the.Internet,.or
•. They.can.be.placed.externally.to.the.local.network,.on.a.separate.sub-
network.or.with.an.open.Internet.connection....
Wherever.in.the.network.an.AdderView.CATx.IP.is.situated,.you.will.need.to.
determine.certain.configuration.issues.such.as.address.allocation.and/or.firewall.
adjustment.to.allow.correct.operation..Please.refer.to.
.within.
the.Configuration.chapter.for.more.details..
IMPORTANT: When an AdderView CATx IP is accessible from the public Internet 
or dial up connection, you must ensure that sufficient 
 are 
employed. 
IP network link
To connect the Global user (IP network) port
1. Depending.upon.where.in.the.network.the.AdderView.CATx.IP.is.being.
connected,.run.a.category.5,.5e.or.6.link.cable.from.the.appropriate.hub.or.
router.to.the.AdderView.CATx.IP.unit.
2. Connect.the.plug.of.the.link.cable.into.the.IP.port.on.the.front.panel.of.the.
AdderView.CATx.IP.unit.
3. Configure.the.network.settings.as.appropriate.to.the.position.of.the.
AdderView.CATx.IP.within.the.network.-.see.
.for.details..