ADC LTPH-UM-1261-01 Manuel D’Utilisation
2-8
DSX and HDSL Connector Procedure
S
PAN
P
OWERED
X
DSL C
ONNECTIONS
Perform the following procedure to connect the Span Powered xDSL interface cables to connectors P1, P2, P3 and
P4 (see
P4 (see
for connector location and
for connector descriptions).
Span Powered xDSL Connector Procedure
Step
Action
1
Complete one of the following steps to make the DSX-1 and HDSLx connections to the shelf using one of
the following methods: Plug the DSX-1 interface cables into P1 and P2 and the HDSLx interface cables
into P3 and P4. Wire-wrap the DSX-1 and HDSLx inputs to the appropriate individual card slots. Pin
assignments are listed in
the following methods: Plug the DSX-1 interface cables into P1 and P2 and the HDSLx interface cables
into P3 and P4. Wire-wrap the DSX-1 and HDSLx inputs to the appropriate individual card slots. Pin
assignments are listed in
.
2
.
DANGER
Before making any Span Powered xDSL connections to the HMS-318 List 3 shelf, ensure that the
Main CO power breaker is off. Otherwise, severe injury to the installer or damage to the unit may
result.
Main CO power breaker is off. Otherwise, severe injury to the installer or damage to the unit may
result.
Step
Action
1
Complete one of the following steps to make the Span Powered xDSL connections to the shelf using one
of the following methods:
of the following methods:
• Plug the Span Powered xDSL interface cables into P1, P2, P3 and P4.
• Wire-wrap the Span Powered xDSL inputs to the appropriate individual card slots. Pin assignments
• Wire-wrap the Span Powered xDSL inputs to the appropriate individual card slots. Pin assignments
are listed in
2
.
Note:
See
for the location of the HDSLx Span connectors. HDSLx Span
pin assignments are listed in
. Standard
PIC cable color codes are listed in
.
Note:
for the location of the HDSL Span connectors. HDSL Span
pin assignments are listed in
Standard PIC cable color codes are listed in