ADC InterReach Manuel D’Utilisation
8/08
•
106290AE
InterReach
®
W
ir
eless
Repeaters
InterReach
®
Wireless Repeaters
Mobile TV In-Building Repeater
3
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
GUI Features
Automatic Level Control (ALC)
The system will control the output power to
maintain the stability and protect the unit.
RSSI Indicator
Optimize and ease donor antenna placement
during installation.
Isolation Check
The device offers an isolation check configurable in
the GUI when the system is set up and powered on.
The system will control the output power to
maintain the stability and protect the unit.
RSSI Indicator
Optimize and ease donor antenna placement
during installation.
Isolation Check
The device offers an isolation check configurable in
the GUI when the system is set up and powered on.
User-friendly Interface
USB connection allows you to control:
• adjust gain
• perform system test and calibration
Over Power Shut Down
The system can detect excessive power and will
shut down after 5 seconds to protect the unit.
Recheck occurs after 5 minutes and the system will
automatically resume operation when normal power
levels are reached.
USB connection allows you to control:
• adjust gain
• perform system test and calibration
Over Power Shut Down
The system can detect excessive power and will
shut down after 5 seconds to protect the unit.
Recheck occurs after 5 minutes and the system will
automatically resume operation when normal power
levels are reached.
Typical Specifications
RF SPeCIFICAtIOn
Operating Frequency for the 700 MHz
Operating Frequency for the 700 MHz
6 MHz channel selective
Down Link:
716-722 MHz (ch 55), 722-728 (ch 56), 728-734 (ch 57)
Output Power:
+13 dBm
Gain:
80 dB
Flatness:
±2 dB Full Band
Out of Band Gain:
65 dB Offset 1 MHz; 55 dB Offset 5 MHz
nOISe FIGURe
Up Link:
Up Link:
5 dB max
VSWR:
1.5 max
Frequency Stability:
±0.05 ppM max
ALC:
20 dB min
Gain Control Range:
30 dB min; .5 dB Step
Delay:
5 usec max
Supply Voltage:
6 V
AC 110~220V to DC 6V SMPS Adaptor
Current Consumption:
3A max
DC 6V Current Consumption
enVIROnMentAL
Operating temperature:
Operating temperature:
-5°C ~ +40°C
Humidity
85%
InDICAtORS/COntROLS
USB Port:
USB Port:
Gain, system test, calibration
LeD:
tX Shutdown:
Off (normal operation), red (alarm)
Isolation:
Yellow flashing (test), solid yellow (alarm)
DC Power:
Green (normal operation)
RSSI Indicator:
Thresholds measured at donor port
No LED <-105 dBm input
1 LED >-105 dBm input
2 LED >-95 dBm input
3 LED >-85 dBm input
PHYSICAL
Donor Antenna:
Donor Antenna:
N Type Female
Service Antenna:
N Type Female
Dimensions (WxHxD):
150 x 200 x 67 mm (5.9 x 7.8 x 2.6 in.) including wall mount bracket
Weight:
1.79 kg (3.95 lbs.)
Mounting or Installation:
Wall mount