ADC SG-1 Manuel D’Utilisation
7-63
Using the no ip ospf advertise network command
This command deletes advertisement of a network.
Usage
no ip ospf advertise network <area-id> <Network>
For parameters and examples, refer to
Using the mpls ip interface command
This command enables MPLS forwarding of Ipv4 packets for a specific system interface. One limitation is that
currently the MPLS may be configured for one interface only of type VLAN or Ethernet.
currently the MPLS may be configured for one interface only of type VLAN or Ethernet.
Usage
mpls ip interface <Ethernet | VLAN | ATM > <slot number> \ <port number>
[\<sub-interface>]
Parameter(s)
<slot number>
This is the SCC slot number; valid number range is 0 to 2.
<port number>
This is the SCC port number; valid values are 1 or 2.
<sub-interface>
This is the SCC for ATM sub-interface number; valid number range is 1 to 4095.
Example(s)
Using the no mpls ip interface command
This command disables mpls forwarding of IPv4 packets from the system interface.
Usage
no mpls ip interface <Ethernet | VLAN | ATM > <slot number> \ <port number>
[\<sub-interface>]
Host(config)# no ip ospf advertise network
Host(config)# mpls ip interface
Host(config)# mpls ip Ethernet 0\1
Host(config)# no mpls ip interface