ADC SG-1 Manuel D’Utilisation
6-28
Using the copy-TFTP command
Use this command to copy a new application software (image) or license file from a TFTP server to the flash
memory of the SCC-ETH card.
memory of the SCC-ETH card.
Usage
copy-TFTP flash [<IP address> | <license>] <ip address> <file name>
Parameter(s)
<ip address>
This is the IP address of the TFTP server to be used for the software or license upgrade.
<license>
This parameter will allow the upgrading of a license file on the SCC.
<file name>
This is the file name used for the software or license upgrade (the file name is 1 to 64 alphanumeric characters).
Example(s)
Using the ping command to test network connectivity
Use the Ping command to elicit an ICMP ECHO_RESPONSE from a host or gateway. This command can be used
to send a PING via an ATM or IP interface.
to send a PING via an ATM or IP interface.
Usage
ping <ip address> [-c <number>| -i <number> | -s <number>] [atm <atm slot number>
<atm sub-interface number> <atm vpi number> <atm vci number> (end-loopback|repeat
<number>)]
Parameter(s)
<ip address>
Host> copy-TFTP flash
Note:
The SG-1 as a service creation machine uses a license mechanism, which enables the activation and
deactivation of specific services. Use the [license] parameter to upgrade the current version of the
license file running on the SCC.
license file running on the SCC.
Host> copy-TFTP flash 192.168.0.1 V10_PM
Download in progress
99%
Closing the download process.
Pack loaded successfully.
In order to use new software, please reload the system
Host>
Host> copy-TFTP flash license 192.168.1.2 lic101.txt