ADC SG-1 Manuel D’Utilisation

7-6

The system supports redundancy between 0\1 and 0\2 ethernet interface or between 1\1 or 1\2 Ethernet interface. 
The system, automatically while detects a malfunction in the working Ethernet (for example link down), switches to 
the protecting (redundant) Ethernet interface.

Use this command to configure Ethernet port redundancy.

Usage

port-ethernet redundancy-enable <working slot>\<working port> <protection 

slot>\<protection port> <non-revertive | revertive>

Parameter(s)

<working slot>

This is the working Ethernet interface slot number; valid values include 1 or 2.

<working port>

This is the working Ethernet interface physical port number; the value range is 1 to 3.

<protecting slot>

This is the protecting Ethernet interface slot number; valid values include 1 or 2.

<protecting port>

This is the protecting Ethernet interface physical port number; the value range is 1 to 3.

<non-revertive>

This configures non-revertive mode.

<revertive>

This configures revertive mode.

The slot number that you want to configure (see 

Gigabit Front I/O

0\1

Gigabit Rear I/O

0\2

Gigabit Front (PMC) I/O

1\1

1\2