ADC 700F Manuel D’Utilisation
Chapter 7: Configuring Bridging/Routing Sessions
Megabit Modem 400F, 500L, 600F, and 700F User Manual
69
C
ONFIGURING
THE
LAN
Devices on your local LAN attach to the modem through its LAN port. Configure parameters
for communicating between the local LAN and the modem.
for communicating between the local LAN and the modem.
Configure Modem Parameters
Access the General System page to set up modem system
parameters.
parameters.
1
From the lan menu, click general to open the LAN General
window.
window.
Information
Description
IP
Internet Protocol. Operates at layer 3 and provides addressing.
IP Address
The IP address of the modem Ethernet 10/100BASE-T LAN port.
IP Net Mask
The IP Net Mask address of the modem Ethernet 10/100BASE-T LAN port.
Bridging
The function of filtering/forwarding frames based on layer 2 headers.
Enable
Enables/Disables bridging.
Port Priority
The priority of the port on a LAN segment.
Routing
The function of routing packets based on layer 3 headers.
Enable
Enables/Disables routing.
RIP Direction
The direction the RIP routing information flows.
RIP Version
The version of the RIP protocol.
lan
general