ADC 600F Manuel D’Utilisation
Megabit Modem 400F, 500L, 600F, and 700F User Manual
95
A
S
PECIFICATIONS
AND
D
ATA
WAN I
NTERFACE
S
PECIFICATIONS
ADSL (Asymmetric Digital Subscriber Line)
Maximum transmission rate:
Downstream
Upstream
7.552 Mbps
928 kbps
Minimum transmission rate to sync 64 kbps
Rate-adaptive data rate resolution
32 kbps increments
Signal Format
DMT (Discrete Multitone) line code
Connector
RJ-11
ATM (Asynchronous Transfer Mode)
ATM Adaptation Layer
AAL5 (ITU I.363.5) - Supports encapsulation and
de-encapsulation of AAL5 Protocol Data Units (PDUs) for
convergence. Segmentation and Reassembly (SAR) layer
segments and reassembles AAL5 PDUs into ATM cells that are
48 byte SAR-PDUs.
de-encapsulation of AAL5 Protocol Data Units (PDUs) for
convergence. Segmentation and Reassembly (SAR) layer
segments and reassembles AAL5 PDUs into ATM cells that are
48 byte SAR-PDUs.
ATM Layer
Attaches or strips the 5-byte header to the 48-byte SAR-PDU.
Performance is a maximum line rate of 17,812 cells per second
downstream and 2,189 cells per second upstream.
Performance is a maximum line rate of 17,812 cells per second
downstream and 2,189 cells per second upstream.
Cell Format
Format complies with ITU I.361 ATM cell format. Cell delineation
complies with ITU I.432 Cell Delineation and HEC. Cells are fixed
length (53 bytes), including 5 bytes of header and 48 bytes of
payload. Included in the header are the VPI and VCI number.
complies with ITU I.432 Cell Delineation and HEC. Cells are fixed
length (53 bytes), including 5 bytes of header and 48 bytes of
payload. Included in the header are the VPI and VCI number.
Virtual Circuit type
Permanent Virtual Circuit (PVC) per ATM forum UNI version 3.1
Maximum Virtual Circuits
32 virtual circuits that can simultaneously connect to service
providers for sessions encapsulated either as PPP or RFC 1483
Bridging/Routing
providers for sessions encapsulated either as PPP or RFC 1483
Bridging/Routing