ADC 600F Manuel D’Utilisation

System security includes the use of the Admin IP Address and configuring console access 
through the RS-232 MGMT port.

This address determines which devices on the LAN can manage the Megabit Modem. You can 
select:

limited access where only one device on the LAN can manage the modem

general access where any device on the LAN can manage the modem

Perform the following to configure administration for your modem:

From the 

 menu, click 

 to open the General System window. 

Select one of the following and enter the appropriate IP address:

When you allow only one device on the LAN to manage the modem, enter the 
IP address for that one device in the IP address field.

When you allow any device on the LAN to manage the modem, enter 

 in the 

IP address field.

Click 

 to activate the changes. 

Example: The illustration above shows the modem configuration to allow only the station with 
the IP address 192.168.0.3 to access the modem on the same LAN.