ADC 600F Manuel D’Utilisation
Selecting Configuration Parameters
52
Megabit Modem 400F, 500L, 600F, and 700F User Manual
S
ELECTING
C
ONFIGURATION
P
ARAMETERS
There are many configuration options for the modem from which you can select. The following
options are recommended for enhanced performance.
options are recommended for enhanced performance.
•
DHCP to allow the modem to dynamically serve IP addresses to devices on the LAN
•
NAT to map public IP addresses (proxy IP addresses) acquired from the service provider
for the WAN sessions to private IP addresses on the LAN
for the WAN sessions to private IP addresses on the LAN
The following table shows possible configurations, with the recommended configuration first:
S
ETTING
U
P
THE
PPP M
ODE
(700F O
NLY
)
For the Megabit Modem 700F only, you can select either PPP over ATM or RFC 1483
bridge/router encapsulation for all sessions you set up. To have all sessions (up to 32) as PPP
over ATM mode of operation, do the following:
bridge/router encapsulation for all sessions you set up. To have all sessions (up to 32) as PPP
over ATM mode of operation, do the following:
1
From the
system
menu, select
general
.
2
Select
PPP Over ATM
as the
Mode
of Operation
.
3
Click
Apply
, then reset the
modem.
DHCP
NAT
How IP Address Acquired
On
On
Dynamic
Off
On
Dynamic
On
On
Fixed
Off
On
Fixed
Off
Off
Fixed