ADC EMU-830 Manuel D’Utilisation
2-3
2
Align the EMU-830 card with the card guides at the top and bottom edges of Slot 17, then push the card
in until the EMU-830 front panel is flush with the front of the shelf (
in until the EMU-830 front panel is flush with the front of the shelf (
). The connector positions in
slots 1 through 16 prevent the EMU-830 from being installed in the wrong slot.
Figure 2-3. Installing the EMU-830 into Slot 17 of EMS-830
3
Tighten the two captive retaining screws on the front of the EMU-830 card.
Step
Action
EMU-830
EMS-830 shelf