ADC EMU-830 Manuel D’Utilisation

Chapter 3: Provisioning

3-14

In the Config menu, press M to display the Modem Parameters menu (

). This menu is used to configure 

the EMUs modem parameters for autonomous dial-out reporting of alarms to a remote management station or 
printer.

 Connect and configure the shelf modem as instructed in 

1

Navigate the menu using the 

Ç

 and 

È

 arrow keys on the keyboard.

2

Use  the  SPACEBAR to toggle the Data Bits field to "7" or "8" (to match modem at remote management 
station).

3

Toggle the Parity Bit field to "NONE," "ODD," or "EVEN" (to match modem at remote management 
station).

4

Toggle the Stop Bit field to "1" or "2" (to match modem at remote management station).

5

Toggle the Baud Rate field to the appropriate setting (to match modem at remote management station).

6

In the Phone Number field, enter the phone number of the modem at the remote management station.

7

Press ENTER to confirm settings and return to the top of the Config menu.

 The Phone Number field must be preceded by "atdt" for tone dialing or "atdp" for pulse 

dialing.
The Init String field displays "ATE1Q0." This is the default Hayes compatible modem 
initialization string. If you need to change this initialization string, consult your modem user 
manual or call the ADC Technical Assistance Center at the number listed on page B-1.