Advantek Networks AWN-PCI-54R Manuel D’Utilisation

Page de 35
 
28 
[Network Authentication] 
-- 
Open System:
 No authentication is needed among the wireless devices. 
-- 
Shared  Key: 
Only Wireless  device  using  a  shared  key  (WEP  Key  identified)  is  allowed  to 
connecting each other. Setup the same key as the wireless device which the card intends to 
connect. 
-- 
WPA-PSK:
  It  is  a  special  modem  of  WPA  for  home  users  without  an  enterprise 
authentication server and provides the same strong encryption protection. 
-- 
WPA2-PSK  (for  WPA2  Personal): 
This  option  will  be  present  only  if  the  wireless  network 
adapter and its driver support WPA2. 
-- 
WPA  802.1X: 
802.1x  authentication  is  required  in  WPA.  In  the  802.11  standard,  802.1x 
authentication was optional.   
-- 
WPA2  802.1X: 
WPA2  is  the  next-generation  Wi-Fi  security  standard,  combining  the  most 
powerful  authentication  and  encryption  techniques  to  protect  wireless  networks  from 
unauthorized  use.  Based  upon  the  recently-ratified  IEEE  802.11i  standard,  WPA2  adds  the 
Advanced Encryption Standard (AES) to the original WPA specification to provide the greatest 
levels of network security available. The National Institute of Standards and Technology (NIST) 
advocates  the  use  of  AES  security  to  protect  sensitive  digital  information  on  government 
networks. 
[Data Encryption] 
-- 
Disabled:
 Disable the WEP Data Encryption. 
--
 WEP:
 Enabled the WEP Data Encryption. When the item is selected, you have to continue 
setting the WEP Key Length & the key Index. 
-- 
TKIP: 
Enable the  TKIP  Data Encryption. When the item is  selected,  you have to continue 
setting the Network Key & Confirm network key. 
--
 Network Key: 
The keys are used to encryption data transmitted in the wireless network. Fill 
in the text box by following rules below: 
 
 64-bit: Input 10 digit Hex values (in the “A-F”, “a-f”, and “0-9” range) as the encryption 
 
 
 
keys. For example: “0123456aef” 
 
 128-bit: Input 26 digit Hex values (in the “A-F”, “a-f”, and “0-9” range) as the     
 
 
 
encryption keys. For example: “01234567890123456789abcdef” 
-- 
Confirm Network Key:
 Re-type again the Network key in this text box. 
-- 
Key Length:
 You may select the 64-bit or 128-bit to encryption transmitted data. Larger key 
length will provide higher level of security, but the throughput will be lower. 
-- 
Key Index (Advanced):
 The maximum of key index is 4. 
[802.1X configure] 
-- 
EAP  TYPE  (Extensible  Authentication  Protocol  Authentication  Types): 
Because  WLAN 
security  is  essential  and  EAP  authentication  types  provide  a  potentially  better  means  of 
securing  the  WLAN  connection,  vendors  are  rapidly  developing  and  adding  EAP