ADC Campus-REX RS Interface Card Manuel D’Utilisation
Monitoring with an ASCII Terminal
6-10
Campus-REX RS Interface Card User Manual
V
IEWING
P
RODUCT
I
NFORMATION
The Product Information screen displays manufacturing information about
the Campus-REX RS Interface Card. This information is important if you
ever need to contact ADC for technical support. To open the Product
Information screen:
the Campus-REX RS Interface Card. This information is important if you
ever need to contact ADC for technical support. To open the Product
Information screen:
1
From the Main Menu, type
then press
. The System Status
screen displays.
2
Type
then press
. The Product Information screen displays.
The Product Information screen displays the following information:
•
the version number of the Campus-REX software (this also displays in
the heading of all the terminal screens)
the heading of all the terminal screens)
•
the PROM checksum, a hexidecimal number used to verify unit PROMs
•
the hardware version of the Campus-REX RS Interface Card
1
ENTER
5
ENTER
May 3, 1999
ADC DSL SYSTEMS INC., CAMPUS RS, Version 4.1e
13:15:50
Local Unit ID:
Campus-REX Unit #34
Local I/F:
REX
Remote Unit ID: Campus-V.3
Remote I/F: FRAC V.35
Circuit ID:
Network Extension Circuit 5001
PRODUCT INFORMATION
Software Version:
4.1e
PROM Checksum:
B24E
Hardware Version:
FFD0
Desktop
AC
RTC Not Installed
(R)eturn
(M)ain Menu
ENTER CHOICE>
CAD1069i5.book Page 10 Thursday, May 30, 2002 7:32 AM