ADC Campus-REX RS Interface Card Manuel D’Utilisation
Campus-REX RS Interface Card User Manual
4-1
4
C
ONFIGURING
AND
M
ONITORING
THROUGH THE
LCD
You can configure the Campus-REX RS Interface Card and view system
information using the LCD and menu buttons located on the front of the
Campus-RS Desktop Unit or a CMU installed in the Campus-Star chassis.
information using the LCD and menu buttons located on the front of the
Campus-RS Desktop Unit or a CMU installed in the Campus-Star chassis.
This chapter describes how to use the LCD to set the individual
configuration options.
configuration options.
You can also perform these functions through an ASCII terminal connected
to the Desktop Unit or a Campus-RS Line Unit installed in the Campus-Star.
To use an ASCII terminal to configure the system, see
to the Desktop Unit or a Campus-RS Line Unit installed in the Campus-Star.
To use an ASCII terminal to configure the system, see
. To view system and status information, see
.
For Information About:
See Page:
CAD1069i5.book Page 1 Thursday, May 30, 2002 7:32 AM