ADC Campus-REX RS Interface Card Manuel D’Utilisation
Configuring with an ASCII Terminal
5-22
Campus-REX RS Interface Card User Manual
2
Type
then press
. The Loopback Settings Menu displays.
Initiating a Loopback
To initiate a loopback condition:
1
Open the Loopback Settings menu.
2
Type the number that corresponds to the desired loopback then press
. The Loopback Settings menu displays the new loopback status.
Clearing a Loopback
To clear a loopback condition:
1
Open the Loopback Settings menu.
2
Type
then press
. The system disables the loopback and the
Loopback Settings menu displays.
1
ENTER
May 3, 1999
ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx
13:29:44
Local Unit ID:
Campus-REX Unit #34
Local I/F:
REX
Remote Unit ID: Campus-REX Unit #12
Remote I/F: REX
Circuit ID:
Network Extension Circuit 5001
LOOPBACK SETTINGS
ACTIVE LOOPBACK: None
1) Local
Data Port toward Local
Data Port
N/A
2) Remote Data Port toward Local
Data Port
N/A
3) Local
Data Port toward Remote Data Port
4) Remote Data Port toward Remote Data Port
5) Terminate Loopbacks
6) Loopback Timeout (min):
None
(20, 60, 120, None)
WARNING: Any loopback will remove data link from service.
(R)eturn
(M)ain Menu
ENTER CHOICE>
ENTER
6
ENTER
CAD1069i5.book Page 22 Thursday, May 30, 2002 7:32 AM