ADC MM701F Manuel D’Utilisation
Chapter 3: Managing the Modem Using a Web Browser
MM701F User Manual
21
Update System Software
You can upgrade the software on your MM701F. To upgrade, you must specify the IP address
of the server where the new software is stored. The MM701F uses TFTP to download the
software which comprises a configuration file (must be named “celsiancfg”) and an image file
(must be named “image”).
of the server where the new software is stored. The MM701F uses TFTP to download the
software which comprises a configuration file (must be named “celsiancfg”) and an image file
(must be named “image”).
1
Click
System
on the menu bar, then
System Update
to access the
System Update
page.
2
Enter the
IP Address
of the server where the firmware image or configuration file is located
.
3
From
Select file to update,
do one of the following:
•
select
Configuration
to download the configuration file “celsiancfg”
•
select
Image
to download the image file “image”
4
Click
Download
to start the file download.
The software update process takes about 90 seconds to complete. After the
update the modem resets itself. Do not recycle the power during this process.
This will cause permanent image corruption.
update the modem resets itself. Do not recycle the power during this process.
This will cause permanent image corruption.