Adtran L768 Manuel D’Utilisation
Chapter 3: Terminal Menu Operation and Structure
61202192L1-1
Express L768/L1.5 User Manual
27
whose destination address is not found in the route table. If this address is all
zeros, then the first WAN connection becomes the default gateway.
zeros, then the first WAN connection becomes the default gateway.
IP/Static Routes
Static Routes can be inserted under this menu.
Static Routes/Active
Write security: 4; Read security: 5
Adds this static route entry to the IP routing table when set to Yes (def) and
removes it (if it was previously added) if set to No.
Adds this static route entry to the IP routing table when set to Yes (def) and
removes it (if it was previously added) if set to No.
Static Routes/IP Address
Write security: 4; Read security: 5
This is the IP address of the host or network address of the device being routed
to.
This is the IP address of the host or network address of the device being routed
to.
Static Routes/Subnet Mask
Write security: 4; Read security: 5
This mask determines the bits in the previous IP address that are used. If this
is to be a host route, it must be set to all ones (255.255.255.255).
This mask determines the bits in the previous IP address that are used. If this
is to be a host route, it must be set to all ones (255.255.255.255).
Static Routes/Gateway
Write security: 4; Read security: 5
This is the IP address of the router to receive the forwarded IP packet.
This is the IP address of the router to receive the forwarded IP packet.
Static Routes/Hops
Write security: 4; Read security: 5
This is the number of router hops required to get to the network or host. Max-
imum distance is 15 hops.
This is the number of router hops required to get to the network or host. Max-
imum distance is 15 hops.
Static Routes/Private
Write security: 4; Read security: 5
When set to No, the Express L768/L1.5 will advertise this static route using
RIP. Otherwise, setting to Yes means that the route is kept private.
When set to No, the Express L768/L1.5 will advertise this static route using
RIP. Otherwise, setting to Yes means that the route is kept private.