Adtran L768 Manuel D’Utilisation
Chapter 3: Terminal Menu Operation and Structure
30
Express L768/L1.5 User Manual
61202192L1-1
communication across NAT must be initiated from the LAN side of the Ex-
press L768/L1.5. Web Server allows a single machine on the NAT side to be
accessed from the Internet side of NAT. This provides outside access to a web-
server, mail, or ftp server.
press L768/L1.5. Web Server allows a single machine on the NAT side to be
accessed from the Internet side of NAT. This provides outside access to a web-
server, mail, or ftp server.
NAT/Default IP
This is the IP address used by the Express L768/L1.5 for Network Address
Translation when nothing is assigned during the PPP negotiation when PPP
mode is active or when nothing is specified in the DLCI Mapping’s Link IP
Address.
Translation when nothing is assigned during the PPP negotiation when PPP
mode is active or when nothing is specified in the DLCI Mapping’s Link IP
Address.
IP/DNS
The Domain Name Server parameters used by the Express L768/L1.5 are spec-
ified here. The DNS server addresses can be exchanged between PPP peers.
When a connection occurs and IPCP is negotiated, the Express L768/L1.5 will
get the DNS server addresses from the PPP peer. If the configured DNS server
addresses (Server 1 and Server 2) are all zeros, the addresses from the PPP
peer are used. In NAT mode, the PPP peer’s DNS addresses are always used.
The DNS addresses set in Server 1 and Server 2 are offered to a PPP peer if so requested.
ified here. The DNS server addresses can be exchanged between PPP peers.
When a connection occurs and IPCP is negotiated, the Express L768/L1.5 will
get the DNS server addresses from the PPP peer. If the configured DNS server
addresses (Server 1 and Server 2) are all zeros, the addresses from the PPP
peer are used. In NAT mode, the PPP peer’s DNS addresses are always used.
The DNS addresses set in Server 1 and Server 2 are offered to a PPP peer if so requested.
DNS/Domain Name
Write security: 3; Read security: 5
This is a text string used to represent the domain name used by the Express
L768/L1.5.
This is a text string used to represent the domain name used by the Express
L768/L1.5.
DNS/Server 1
Write security: 3; Read security: 5
This is the IP address for the primary DNS device. It is the first server that do-
main name requests are sent.
This is the IP address for the primary DNS device. It is the first server that do-
main name requests are sent.
DNS/Server 2
Write security: 3; Read security: 5
This is the IP address for the secondary DNS device. It is used as a back-up in
case the primary address does not respond to the request.
This is the IP address for the secondary DNS device. It is used as a back-up in
case the primary address does not respond to the request.