Lancom Systems 3550 Manuel D’Utilisation

LANCOM 3550 Wireless

53

Configuration with 
WEBconfig or Telnet

Under WEBconfig or Telnet you can set the settings for the point-to-point
connections under the following paths:    

Access points equipped with two wireless modules can be used to establish
wireless bridges across multiple stations. Each wireless module is configured
as a 'Master' and then 'Slave' in turn.



The use of relay stations each equipped with two WLAN modules
simultaneously solves the problem of the "hidden station", by which
the MAC addresses of the WLAN clients are not transferred over mul-
tiple stations.

IEEE 802.11i can be used to attain a significant increase in the security of
WLAN point-to-point connections. All of the advantages of 802.11i such as
the simple configuration and the powerful encryption with AES are thus avail-
able for P2P mode, as are the improved security of the passphrase from the
LANCOM Enhance Passphrase Security (LEPS).

To activate the 802.11i encryption for a correctly configured P2P connection,
adjust the settings for the first logical WLAN network in the appropriate
WLAN interface (i.e. WLAN-1 if you are using the first WLAN card for the P2P

WEBconfig

Expert configuration 

 Setup 

 Interfaces 

 

WLAN-Inter-

faces

 Interpoint-Settings

Terminal/Telnet

cd /Setup/Interfaces/WLAN-Interfaces/
Interpoint-Settings