MicroNet Technology SP3367N Manuel D’Utilisation

 

Enter the Subnet Mask address of the destination LAN. 

This is the gateway IP Address where packets are sent. Enter 
the gateway IP Address and select the channel (PVC) you 
want to configure. 

The number of hops (routers) to pass through to reach the 
destination LAN. It must be between 1 and 15. 

Select “Yes”, this routing path will be propagated to other 
hosts through RIP broadcasts. Select “No”, this routing path 
will be kept private and it is not included in RIP broadcasts. 

 

Network Address Translation (NAT) allows multiple users at your local site to access 

the Internet through a single Public IP Address or multiple Public IP Addresses. NAT 

provides Firewall protection from hacker attacks and has the flexibility to allow you to 

map Private IP Addresses to Public IP Addresses for key services such as Websites 

and FTP. 

 

 

 

Please select the channel (PVC) you want to configure. 

The activated or deactivated status for the NAT function will 
be shown here. 

Select “Single” if you only have a public IP Address. Select 
“Multiple” if you have multiple IP Addresses. 

 

 

 

 

33