MicroNet Technology SP3367N Manuel D’Utilisation

 

This is the item number to record the setting. 

Select which channel (PVC) to configure. 

Select the access to the Internet (Outgoing) or from the 
Internet (Incoming), or Both. 

 

This is the item number to record the setting rule. 

Select to filter through the IP Address or MAC Address. 

Select “Yes” to enable the current rule, select “No” to cancel 
the current rule. 

Enter the start IP Address which will be monitored. If “0.0.0.0” 
is set, it means for any IP Address. 

Enter the Subnet Mask based on the Source IP Address. 

LAN users use port number to distinguish one network 
application over another such as 21 is for FTP service. The 
port number range is from 0 to 65535. It is recommended that 
this option be configured by an advanced user. 

Enter the start IP Address which will be monitored. If “0.0.0.0” 
is set, it means for any IP Address. 

Enter the Subnet Mask based on the Destination IP Address. 

This is the port or port ranges that define the application. 

It is the packet protocol type used by the application. Please 
select “TCP”, “UDP” or “ICMP”. For example, FTP service, 
you have to select “TCP”. 

Select action for the traffic mismatching current rule. 
“Forward” is to leave it pass through. “Next” is to check it by 
the next rule. 

 

 

39