MicroNet Technology SP5052 Manuel D’Utilisation

for response. If the other party cannot respond the message in
10 seconds, VoIP FXO gateway will regard the opposite party as
IDLE state and disconnect the call. When CallAlive is
deactivated, RoundTripDelay message will not be sent during
connection.

- keypad

keypad type when relay DTMF signal.
0 : In-Band
1 : h.245 alphanumeric
2 : h.245 signal type
3 : q.931 user info

- pincode

To specify 2 sets of pincode.

-sendxcode send access code after connection (1 = ON; 0 = OFF)
-access

specify access codes (per port basis).

Note:

This feature can only be implemented with LineToLine service. Please

refer to –service above.

This function can help users to restrict callers to dial particular

numbers from IP side to PSTN side. For example, if user set
sysconf –access set1 1111, when callers call from IP side and enter
VoIP FXO gateway port 1, if user dial 234 after hearing dial tone, VoIP
will dial out 1111234.

usr/config$ sysconf –sendxcode 1 –access set1 1111

5.14 [h323] command

This command is to configure H.323 related parameters.

usr/config$ h323
H.323 stack information and configuration
Usage:
h323
h323 [-gk ipaddress] [-multicast used] [-e164 number] [-alias h323id]
[-rtp port] [-h245 port] [-ttl time] [-gkfind port] [-ras port]
[-range [start num1] [end num2]]
h323 -print

-print

Display H.323 stack information and configuration.

-mode

Configure as Gatekeeper mode or Peer-to-Peer mode.

-gk

Gatekeeper ip address. (0.0.0.0 ~ 255.255.255.255)

-gkname

Gatekeeper ID

-dfgw

Default Gateway ip address. (0.0.0.0 ~ 255.255.255.255)

-e164

IP side registered number (phone number).

-alias

IP side registered H.323 alias (account name).

-gkdis

Gatekeeper auto discovery (On=1, Off=0).

-rtp

RTP port number (1024~65532).

-h245

H.245 port number (N/A).

-ttl

RAS TTL time (0~3600 second).

-gkfind

Gatekeeper finding port (1024~65535).