Netopia 4541 Manuel D’Utilisation

 

You will need:

 

■

 

A Windows 95 or 98–based PC or a Macintosh computer with Ethernet connectivity for configuring the 
Netopia 4541/4542. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured.  
See 

.

 

■

 

An ADSL wall outlet wired for a connection to a Local Exchange Carrier (LEC) who suppor ts Symmetric 
Digital Subscriber Line connections.

 

Identify the connectors and switches on the back panel and attach the necessar y Netopia Router cables.

The figure below displays the back of the Netopia 4541/4542 ADSL Router. 

 

.

1.

Connect the mini-DIN8 connector from the power adapter to the power por t, and plug the other end into an 
electrical outlet.

2.

Connect one end of the Categor y 5 cable to the DSL por t, and the other end to your DSL wall outlet.

 

Port

Description

 

Power por t

A mini-DIN8 power adapter cable connection.

Console por t

A DB-9 console por t for a direct serial connection to the console screens. You 
can use this if you are an experienced user. See 

DSL por t

An RJ-48 jack labeled DSL for your ADSL connection.

Ethernet por t

An RJ-45 10/100Base-T Ethernet jack. You will use this to configure the Netopia 
4541/4542. For a new installation, use the Ethernet connection. Alternatively, 
you can use the console connection to run console-based management using a 
direct serial connection. You can either connect your computer directly the 
Ethernet por t using a crossover cable, or connect both your computer and the 
Netopia 4541/4542 to an existing Ethernet hub on your LAN.

Console

Power

Ethernet por t

Console por t

Power por t

ADSL por t

DSL

10/100
Ethernet