Netopia 4541 Manuel D’Utilisation

These screens allow you to configure your network’s use of the IP networking protocol.

■

Details are given in 

.

These screens allow you to configure security on your network by means of filter sets and a basic firewall.

■

Details are given in 

These screens allow you to configure IP address ser ving on your network by means of DHCP, WANIP, and BootP.

■

Details are given in 

You can set the system’s date and time parameters in the Set Date and Time screen.

Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screen 
appears.

Follow these steps to set the system’s date and time:

1.

Toggle NTP (Network Time Prot.) Enabled to On to synchronize the Router’s time and date with a network 
ser ver.  Toggle this field to Off to manually set the time and date; the options in this screen will change to 
allow you to manually enter the time and date parameters.

Note: If time and date are manually set, that information will be lost upon reboot or loss of power.

2.

Enter the IP address of the time ser ver in the field Time Server Host Name/IP Address.

                               Set Date and Time

         NTP (Network Time Prot.) Enabled:  On
         Time Server Host Name/IP Address   204.152.184.72
         Time Zone...                       GMT -8:00 Pacific Standard Time
         NTP Update Interval (HHHH:MM)      0:00

         System Date Format:                MM/DD/YY

         System Time Format:                AM/PM