Netopia 4752 Manuel D’Utilisation

To add a new user account, select Add User in the Security Options screen and press Return. The Add Name 
With Write Access screen appears.

Follow these steps to configure the new account: 

1.

Select Enter Name and enter a descriptive name (for example, the user’s first name). 

2.

Select Enter Password and enter a password. 

3.

To accept the new name/password combination, select ADD NAME/PASSWORD NOW and press Return. 
To exit the Add Name With Write Access screen without saving the new account, select CANCEL. You are 
returned to the Security Options screen.

To delete a user account, select Delete User to display a list of accounts. Select an account from the list and 
press Return to delete it. To exit the list without deleting the selected account, press Escape.

Telnet is a TCP/IP ser vice that allows remote terminals to access hosts on an IP network. The Netopia 4752 
suppor ts Telnet access to its configuration screens. 

CAUTION! You should consider password-protecting or restricting Telnet access to the Netopia 4752 if you 
suspect there is a chance of tampering.

To password-protect the configuration screens, select Easy Setup from the Main Menu, and go to the Easy 
Setup Security Configuration screen. By entering a name and password pair in this screen, all access via serial, 
Telnet, SNMP, and Web ser ver will be password-protected.

To restrict Telnet access, select Security in the Advanced Configuration menu. The Security Options screen will 
appear. There are two levels of Telnet restriction available:

■

To restrict Telnet access to the SNMP screens, select Enable Telnet Access to SNMP Screens and toggle 

                           Add Name With Write Access

         Enter Name:

         Enter Password (11 characters max):

         ADD NAME/PASSWORD NOW              CANCEL