NEC NWA-008869-001 Manuel D’Utilisation
CHAPTER 6 MANAGEMENT AND MAINTENANCE
– 155 –
NWA-008869-001 Rev.1.0
atch6001.fm
(4) Turning ON the power switch to start the device
Turn ON the power switch (PWRSW). Check that a message indicating that startup config has been
erased is displayed on the local console and a prompt is then displayed.
erased is displayed on the local console and a prompt is then displayed.
NOTE:
Never turn OFF the power switch until a prompt is displayed. Otherwise, the contents of flash
memory may be destroyed.
memory may be destroyed.
(5) Turning OFF the power switch
Turn OFF the power switch (PWRSW) to stop the In-Skin Router.
IX1000 Series Router POST (Power On Self Test)
DRAM TEST 1 : Pass
DRAM TEST 2 : Pass
NVRAM TEST : Pass
CPU TEST : Pass
PLD TEST : Pass
LAN1 TEST : Pass
LAN2 TEST : Pass
VOLTAGE : 3.199V Pass
TEMPERATURE : +32.0degC Pass
Config memory is cleared
Copyright (C) NEC Corporation 2001. All rights reserved.
Copyright (C) 1985
− 1998 OpenROUTE Networks, Inc.
Copyright (C) 1995
− 1998 Eric Young
No valid boot records found, attempting flash load
Loading using Flash Load Image "ix1000
− ms − 4.0.5.ldc"
(Omitted)
Router #
Check that config
has been cleared.
SUPER RESET