Netcomm NB6W Manuel D’Utilisation

PPP over ATm/ PPP over Ethernet

If the connection type you choose is PPP over ATM or PPP over Ethernet, please refer to the following information.

According to the ISP’s configuration on the server, you can choose PPPoE or PPPoA modes. 

Choose 

PPPoA or PPPoE and click Next. 

On this screen, you have to make the settings for WAN IP. To get the IP address automatically, click the 

Obtain 

an IP address automatically radio button. Or click Use the following IP address button and enter the IP 
address for WAN interface.

Check 

Enable NAT if you need. 

mTU: 

It means the maximum size of the packet that transmitted in the network. The packet of the data 
greater than the value set here will be divided into several packets for transmitting. 
Type the value into the field of 

MTU. The default MTU value for PPPoE is 1492; while for PPPoA is 1500. 

Click 

Next for the next procedure.