Netcomm NB6W Manuel D’Utilisation
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
YML854Rev1
66
www.netcomm.com.au
Local Network – DHCP Server
This allows you to set DHCP server on LAN interface.
DHCP Server On:
Check this item if DHCP service is needed on the LAN. The router will assign IP address and gateway
address for each of your PCs.
You have to key in
address for each of your PCs.
You have to key in
Start IP Address, End IP Address, and Lease Time. The default lease time is 1day.
Relay On:
Click this button to have a relay setting. And type the Server IP in the IP field.
When the DHCP server is served by another device rather than the router itself, you can relay to that
specific server and enter the IP address of it, as 10.11.95.2 in our example.
When the DHCP server is served by another device rather than the router itself, you can relay to that
specific server and enter the IP address of it, as 10.11.95.2 in our example.
Server and Relay Off:
Check this item if DHCP service isn’t needed on the LAN.
Apply:
Click this button to activate the settings listed above.
You can reserve one specific IP address for a certain PC for particular purpose. Simply add a mapping entry
of MAC address & IP address for that PC by pressing the
of MAC address & IP address for that PC by pressing the
Reserved IP Address List button. The following
window will appear.