Netcomm NB6W Manuel D’Utilisation

Internet – Connections 

To set WAN settings for each service, please open 

Advanced – Internet. This page allows you to edit, to 

remove, or to add WAN settings.

If you click the 

Connect hyperlink under the PVC Name item, the system will connect to WAN automatically. If 

the WAN connection is OK, you can check the detailed information directly. 

You can add new PVC(s) by clicking the 

Add button, edit the settings for the present PVC by clicking 

 in 

the 

Edit column, or delete the existing PVC by pressing 

 icon.  

 

Adding a New One

To add a new WAN connection, please click the 

Add button. The following screen appears.

vPI (virtual Path Identifier): 

Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. 
Please refer to the value that your ISP provides.

vCI (virtual Channel Identifier):

Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 
31 is reserved for well-known protocols). Please refer to the value that your ISP provides.