Epson 80211b Manuel D’Utilisation

After you configure the print server, you need to set up a network port on all 
the computers that will print over the wireless network. First, do the 
following:

1. Make sure you have installed the printer driver and utility software. See 

the Start Here sheet that came with your printer for instructions.

2. Make sure your computer’s wireless mode is set to either 

Infrastructure

, 

if you are connecting to the printer through an access point, or 

802.11b 

Ad Hoc

 if you are connecting without an access point.

If your wireless adapter doesn’t include an 

802.11b Ad Hoc

 option, select 

Ad Hoc

, 

Computer-to-Computer

, or whatever mode your adapter uses 

to communicate without an access point. Do not select a pseudo ad hoc 
or proprietary ad hoc mode. See the documentation for your wireless 
adapter for instructions.

3. If you’re using infrastructure mode, make sure there is a link with good 

signal strength between the computer and the access point.

4. Go to one of the following sections for instructions on setting up a 

network port:

■

■

■

ZLUHOHVVVHUYHUERRN3DJH)ULGD\0D\30