Epson 80211b Manuel D’Utilisation

For printing with the EpsonNet 802.11b Wireless Print Server, make sure 
each computer meets the following requirements:

■

A Microsoft

®

 Windows compatible PC or laptop with a Pentium

®

 

processor or later, 200 MHz or faster recommended

■

Windows 95, Windows 98, Windows Me, Windows NT

®

 4.0, Windows 

2000, or Windows XP

■

32MB of RAM (64MB recommended)

■

100MB of free hard disk space (200MB or more recommended)

■

VGA or better display adapter and monitor

■

CD-ROM or DVD drive for installing the printer software

In addition, each computer needs to be connected to an existing wired 
network that has a wireless access point, or needs to have a wireless adapter 
installed.

■

An access point may be combined with a hub or router or may be a 
separate unit. For a current list of supported access points, see EPSON’s 
web site at: http://support.epson.com.

■

Wireless adapters can be installed in a PCMCIA slot on a laptop, a PCI 
slot in a desktop computer, or connected through a USB port. 

Make sure your wireless adapters(s) work in ad hoc mode if you want to 
print without an access point. For a list of supported adapters, see 
EPSON’s web site at: http://support.epson.com. 

To connect the print server to your printer, you also need a high-speed, 
bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long) with a 
D-SUB, 21-pin, male connector for the print server and a 36-pin 
Centronics

®

 compatible connector for your printer.

ZLUHOHVVVHUYHUERRN3DJH)ULGD\0D\30