Emerson Network Router Manuel D’Utilisation

52

®

 II Software for Micro Motion

®

 Transmitters

To load a configuration file:

1. Open the 

 menu.

2. Click 

.

3. Use the dialog box that appears to identify the name and location of the configuration file to be 

loaded, and click 

.

4. Click 

.

5. When the load is complete, click 

.

If problems occur during the load:

1. Open the 

 menu.

2. Click 

.

3. Enable the 

 option.

4. Repeat the file load.

ProLink II will now save an error log for the load process, and will display a message telling you 
where to find the log file.

The procedures in this section provide a general method for configuring your transmitter using 
ProLink II. Depending on the transmitter you are connected to, different tabs are displayed, and 
different options are displayed on each tab.

For specific configuration information for your transmitter, refer to the transmitter manual. 
Transmitter manuals are shipped with the transmitter, and are also available on the Micro Motion web 
site.

To configure a transmitter using ProLink II:

1. Open the 

 menu.

2. Click 

. A window similar to the following is displayed:

To avoid introducing errors into the transmitter configuration file, save an original 
version and work on a copy. If you do this, you will always be able to restore the 
original version.