Emerson AMC-S402 Manuel D’Utilisation

IPMI Functions List

The AMC-S402 module employs a Module Management Controller (MMC) as specified in the
AMC.0 specification. The MMC provides an Intelligent Platform Management Interface (IPMI)

which will communicate with the ATCA and MicroTCA shelf managers. This MMC controls

and monitors the following:

 Hot swap communication with the shelf manager

 Inlet air temperature

 Voltage monitoring
 Electronic keying as described in the AMC.0 specification

 FRU information

 Drives LED indicators for Hot Swap, In Service, and Out of Service

7.1 IPMI and Management Controller (IPMC)

The design features an IPMI controller consisting of a 16-bit microcontroller, flash
and SRAM. The microcontroller uses I

C interface to communicate the shelf

management controller (ShMC), and sensors and MMC devices on AMC modules.

 An I2C connection provides the communication path between the MMC the

temperature sensor. The I2C serial bus also routes to the SFP+ modules.

 Support hot-swap operation as defined for AMC modules in PICMG AMC.0

specification “Fail-safe flash update” - if interrupted at anytime, the MMC

firmware is still able to respond and re-flash.

 “I2C hang recovery” - able to detect and recover from an I2C bus hang.

7.2 Sensor Data Records

The MMC monitors the status of the module and provides this data so the shelf

manager can read it. Below are the SDRs that the AMC-S402 module creates.

Table 12 Sensor Data Records

Sensor

UNR

UNC

LNC

LNR

ID String

1.8V 1.98

1.93

1.90

1.70 1.67 1.62 +1.8V

5.0V 5.50

5.35

5.25

4.75 4.65 4.5 +5V

12V

13.60 13.40 13.00 11.00 10.60 10.400 +12V

Board Temp (LM60)

N/A N/A N/A Board

Temp

Inlet

Temp

(LM75)

70 60 50 N/A N/A N/A Inlet

Temp

The AMC-S402 includes the standard FRU data records per the IPMI Platform

Management FRU Information Storage Definition, Board Info Area. The AMC-S402

includes additional FRU records as defined in the PICMG 2.9 specification.

6806800H60A AMC-S402 Installation and Use