GarrettCom 6K32FRC Manuel D’Utilisation

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 

 

69 

.

.

 
Note: The GND should be hooked up first. The 6K32F Series units have a floating 
ground, so the user may elect to Ground either + or - terminal to suit the customer’s 
use. 
 

125VDC,  always use a digital voltmeter to measure the output voltage of the power 
supply and determine the lead which is  more  “+ve potential”. The more “+ve” voltage 
lead from 48V  or –48V supply must be connected to the post labeled “+”. 
 
 

The connection procedure is straightforward. Simply connect the DC leads to 

the Switch’s power terminals, positive (+) and negative (-) screws. Ensure that each lead 

is securely tightened.  

 

The 24VDC and 125VDC terminal block on Magnum 6K32F Series is similar 

to that described in the –48VDC information above.

 

The following must be adhered to in order to conform to UL requirements: 

1.   Minimum 18 AWG cable for connection to a Centralized DC power source. 
2.   Minimum 14 AWG cable for connection to earthing wiring. 
3.   Use only with Listed 10 A circuit breaker provided in building installation. 
4.   “Complies with FDA radiation performance standards, 21 CFR subchapter J.” 

or equivalent. 

5.   Fastening torque of the lugs on the terminal block:  9 inch pound max. 
6.   Centralized DC Power Source cable securement, use at least four Minimum 14 

AWG cable ties to secure the cable to the rack at least 4 inches apart with the 
first one located within 6 inches of the terminal block. 

To order the optional Dual-Source -48VDC power supply factory installed, 
order “Dual-Src48V” as a separate line item following the product model. 

 

    Example: Magnum 6K32F-48VDC  

 

 

  Dual-Src-48V   for the regular DS model with no ON-OFF switch 

 

             or    Dual-Src48V-SWITCH   with the ON-OFF manual switch. 

Similarly, order the “Dual –source 24VDC” or “Dual-source 125VDC” as a 
separate line item following the product model.  

  

Example: 

for regular models with no ON-OFF switch 

Or Dual-Src125V-Switch for models with the ON-OFF switch 

   

 Operation of the Dual-Source Magnum 6Ks-48VDC, 24VDC and 125VDC 
Switch models are identical to that of the standard models.