Furuno FELCOM 500 Manuel D’Utilisation

1.  HOW TO INSTALL THE UNIT

The mounting dimensions are shown in 
the outline drawing at the back of this 
manual. Determine the mounting loca-
tion, leaving sufficient space around the 
unit, and then fix the mounting base to 
the mounting location. The mounting 
base is different for bulkhead and desk-
top mounts, however the mounting pro-
cedure is the same for all.

1. Set the mounting base to the mount-

ing location with four self-tapping 
screws (4x16).

2. On the bottom of the telephone, re-

lease the screw shown in the figure. 
(The screw may be discarded.) At-
tach the vulcanizing tape (supplied) 
to the handset fixture. Fasten the 
handset fixture to the bottom of the 
telephone with a screw (3x14, sup-
plied).

3. The catch in the receiver cradle func-

tions to hang up the handset. Set the 
catch in the upward position. To de-
tach the handset from the hanger, 
slide the handset upward.) 

4. Set the telephone to the four catches 

in the mounting base, then slide it to-
ward you until you hear a click.

5. Attach the "SLIDE" label (supplied) to 

the handset.

6. Attach the label (16-007-6927-0) for compass safe distance as shown below.

7. Set the line type of telephone to PB (Push Button) type from DP (Dial Pulse) type as follows.

Mounting base
(Desktop: Use installation materials,
Bulkhead: Use telephone accessories.)

Secure mounting
base with tapping
screws.

Attach handset
fixture here.

Unfasten this screw.

Bottom view

Mounting base stopper

Handset fixture

Catch

Catches

Label (16-007-6927-0)