IBM 22P6415 Manuel D’Utilisation
7.
Save the changes, and then restart your computer. Your computer is able to
access the Internet through the server.
access the Internet through the server.
Setting up Windows NT 4.0 Workstation clients
Before setting up a Windows NT 4.0 Workstation client, be sure that the
TCP/IP protocol is installed with your Ethernet network card. See your
Windows NT 4.0 Workstation manual for instructions on installing the TCP/IP
protocol.
TCP/IP protocol is installed with your Ethernet network card. See your
Windows NT 4.0 Workstation manual for instructions on installing the TCP/IP
protocol.
Use the built-in DHCP server to configure the TCP/IP settings of your
Windows NT 4.0 Workstation computer. The server provides the following
TCP/IP configuration information to your computer:
Windows NT 4.0 Workstation computer. The server provides the following
TCP/IP configuration information to your computer:
v IP address of the computer
v Subnet mask of the computer
v IP address of the default gateway, which is also the IP address of the server
v DNS server
To configure a Windows NT 4.0 Workstation computer as your client computer,
do the following:
do the following:
1.
Click Start
→ Settings → Control Panel.
2.
Double-click Network.
3.
Click the Protocols tab.
4.
In the network protocols list, double-click TCP/IP.
5.
Click the IP Address tab.
6.
Select the Obtain an IP address from a DHCP server radio button.
7.
Save the changes, and then restart your computer. Your computer can
access the Internet through the server.
access the Internet through the server.
Note:
If you do not want to use DHCP service, you must manually configure
the IP address of your computer. To manually configure the IP address
of your computer, do the following:
the IP address of your computer. To manually configure the IP address
of your computer, do the following:
1.
Click Start
→Settings → Control Panel.
2.
In the network component list, double-click TCP/IP.
3.
Click the IP Address tab.
4.
Select the Specifying an IP address radio button.
5.
Type the IP address for your computer.
6.
Type the subnet mask. If you choose to keep the default subnet mask
setting on your server, type
setting on your server, type
255.255.255.0.
7.
Type the IP address of the server in the Default Gateway field.
8.
Click the DNS tab.
9.
Add the IP address of the server to the DNS Service Order list.
10.
Add the name of the computer to the Host Name field.
11.
Click OK to save the changes. Click OK again. Your computer can access
the Internet through the Gateway.
the Internet through the Gateway.
Part 4: Setting up client computers for Internet access
4-5