IBM SAGP-845EV Manuel D’Utilisation

  8

 

 

If the user wants to clear the CMOS Setup data (for example, the user forgot the 

password and needed to clear the setup data then set the password again), the 

user should close the JP2 (set the jumper to 2-3) about 3 seconds, then open it 

again.  For normal operation, set the jumper to 1-2 or open JP2. 

 
•  JP2: Clear CMOS Setup  

 

2-3 

Clear CMOS Setup 

 

 

This board can support keyboard wakeup.  If the user wants to use this function, 

the keyboard has to be supplied with standby 5V by setting the jumper to 2-3. 

 
•  JP4: Keyboard Power Selection 

 

1-2 

VCC 

2-3 5VSB 

 

 
•  JP3: Master/Slave Mode Setting 

 

OPEN 

SLAVE 

SHORT MASTER 

 

 

SAGP-845EV can use two different types of CPU.  One is Pentium4 CPU model and 

the other is Pentium4-M CPU. 

 

While using Pentium4 CPU, please turn OFF 1, 2, 3, 4, 5, and 6 of S1 switch.  CPU 

VID will now automatically configure the power of CPU (Default). 

 

  

 

When using Pentium4-M CPU, turn ON 1,4,6 of S2 switch, and turn OFF 2, 3, 5.  

The power of CPU will be set to 1.3V at this time.