Proxim AP-2000 Manuel D’Utilisation

112

Use the Update AP via TFTP tab to download Configuration, AP Image, Bootloader files, and Certificate and Private 
Key files to the AP. A TFTP server must be running and configured to point to the directory containing the file.

If you do not have a TFTP server installed on your system, install the TFTP server from the ORiNOCO CD. You can 
either install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD’s Xtras/SolarWinds 
sub-directory.
The Update AP via TFTP tab shows version information and allows you to enter TFTP information as described 
below.
•

Server IP Address: Enter the TFTP server IP Address.
–

Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server. 
Note: This is the IP address that will be used to point the Access Point to the AP Image file.

•

File Name: Enter the name of the file to be downloaded (including the file extension). 
–

Copy the updated AP Image file to the TFTP server’s root folder. The default AP Image is located at 
C:/Program Files/ORiNOCO/AP/.

•

File Type: Select the proper file type. Choices include: 
–

Config for configuration information, such as System Name, Contact Name, and so on.

–

Image for the AP Image (executable program).

–

UpgradeBspBl for the Bootloader software.

–

SSL Certificate: the digital certificate for authentication in SSL communications.

–

SSL Private Key: the private key for encryption in SSL communications.

–

SSH Public Key: the public key in SSH communications. Refer to Secure Shell (SSH) for more information.

–

SSH Private Key: the private key in SSH communications. Refer to Secure Shell (SSH) for more information.

–

CLI Batch File: a CLI Batch file that contains CLI commands to configure the AP. This file will be executed by 
the AP immediately after being uploaded. Refer to 

 for more information.

•

File Operation: Select either Update AP or Update AP & Reboot. You should reboot the AP after 
downloading files.