Philips CPWBS054CPWBS054 Manuel D’Utilisation
Your Wireless Base Station 11g
1 Antennas
For connecting to your Wireless Network Adapters
(also called WLAN or WiFi).
(also called WLAN or WiFi).
2 Reset button
• Press it for 2 seconds to reboot the wireless base station 11g.
• Keep it pressed for more than 5 seconds to restore the factory
• Keep it pressed for more than 5 seconds to restore the factory
default settings.
3 Ethernet ports
RJ-45 sockets for Broadband Modem and Ethernet network cables.
4 Power
Socket for connecting the power adapter to the Wireless Base Station 11g.
5 Indicator LEDs
Display the network status.
LED LED
colour
Meaning
Power
Blue
Off when power is disconnected
On when receiving power.
Blinking when rebooting
On when receiving power.
Blinking when rebooting
Wireless
Off when wireless is disabled.
(Wireless
Blue
On when wireless enabled and client active.
home network)
Blinking when transmitting.
Modem
Blue
Off when not connected
(Internet modem)
On when a link is established.
Blinking when transmitting.
Blinking when transmitting.
1/2/3/4 LAN
Yellow (10 Mbps)
Off when not connected
(Wired home network) Blue (100 Mbps)
On when a link is established.
Blinking when transmitting.
Blinking when transmitting.
6 Label with MAC address
The MAC address consists of 12 characters (e.g. 00:30:F1:A1:F4:A5 or, in
general, xx:xx:xx:xx:xx:xx) and is the unique hardware address of this
network device. Some safety features or network identification purposes
need this MAC address.
general, xx:xx:xx:xx:xx:xx) and is the unique hardware address of this
network device. Some safety features or network identification purposes
need this MAC address.
➊
➋➍
➌
➊
➎
➌
ENGLISH
7