Manualsbrain.com
  1. Manuels
  2. Marques
  3. RAD Data comm
  4. ASMi-52
  5. Manuel D’Utilisation

RAD Data comm ASMi-52 Manuel D’Utilisation

Télécharger
Page de 186
Installation and Operation Manual 
Appendix B  IR-IP Interface Module 
ASMi-52 Ver. 2.5 
Viewing IR-IP configuration Data 
B-23 
 
This operation restarts the IR-IP LAN controller. 
To continue your Telnet session, press any key within 15 seconds following the 
confirmation of the reset operation. 
 
Reset WAN 
 
To reset the WAN interface: 
•  From the Resets menu, select Reset WAN. 
You will be prompted to confirm the reset operation. 
 
Resetting the WAN interface causes the WAN controller to be restarted. This results 
in renegotiation of the WAN protocol parameters. 
To continue your Telnet session, press any key within 15 seconds following the 
confirmation of the reset operation. 
 
B.11 
Viewing IR-IP configuration Data 
The View menu is used to view the IR-IP configuration data, and display 
information on its ARP tables, multicast Groups tables and statistics. 
 
To view the IR-IP configuration data: 
•  From the Main menu, select View.  
The View menu appears (
Figure B-18
). 
IR_IP 
 
<IR-IP> 
S/W Ver. 1.21 (date) 
 
Quick Setup 
Management Access 
Advanced Setup 
Device Control 
View 
---------------------------------------------------------- 
 
1. Configuration and Connection 
 
2. ARP Tables 
 
3. Multicast Groups Table 
 4. 
Statistics 
 
Press one of the numbers to select or ESC: 
Figure B-18.  View Menu 
Viewing Configuration and Connection 
This screen is used to view the configuration parameters of IR-IP. In addition, you 
can also view the current status of the LAN and WAN interface. 
 
To access the Configuration and Connection screen: 
•  From the View menu, select Configuration and Connection. 
The View Configuration screen appears (
Figure B-19
). 
Note 
Note