RAD Data comm ASMi-52 Manuel D’Utilisation

Chapter 3  Operation 

Installation and Operation Manual 

3-10 Configuration 

Alternatives

 

ASMi-52 Ver. 2.5 

session over the dedicated timeslot has priority over management via the 
10/100BaseT port. 
1.  Connect the E1/T1 line to the ASMi-52 E1 or T1 port. 
2.  Start a terminal management session and do the following: 

 

Assign an IP address and an IP mask to the dedicated timeslot interface 

 

Enable DTS management 

 

Assign an E1/T1 timeslot for the management traffic. 

3.  Run an SNMP management application, such as RAD’s RADview, open Telnet 

session, or manage ASMi-52 via ConfiguRAD. 

 

ConfiguRAD is a Web-based remote access terminal management software. It 
provides a user-friendly interface for configuring, collecting statistics, and 
performing diagnostic tests on the ASMi-52 units. 

 

To choose an option: 
1.  Click a link in the ConfiguRAD screen to display the next menu. 
2.  Once the target screen is displayed, select a value from the drop-down box or 

enter a value in a text box. 

Some of the ASMi-52 menus have a 'Save' option. When choosing options from 
these menus, you must confirm your choice by selecting 'Save', otherwise your 
entry will be ignored. 
At the left-hand bottom corner, ConfiguRAD provides some auxiliary management 
tools: 
•  Status – shows the number of users currently managing ASMi-52