RAD Data comm ASMi-52 Manuel D’Utilisation

Chapter 4  Configuration 

Installation and Operation Manual 

4-8 

Configuring ASMi-52 for Management

 

ASMi-52 Ver. 2.5 

When the 10/100BaseT port operates in the bridge mode, you can assign MAC 
addresses to the local or remote LAN. 

 

To fill out the bridge table: 
1. Select Bridging Table from the Local LAN Configuration menu (Main menu > 

Configuration > LAN Configuration > Local LAN Configuration > Bridging 
Table). 

The Bridge Table appears (see 

). 

2.  From the Bridge Table, select an empty cell (the one with MAC address 

0000000000 and unassigned port) by typing D to move the cursor downwards 
or U to move it upwards. 
You can also select an existing MAC address to reassign it.  

3.  Once the MAC address is selected, type m to enable editing mode. 

The Bridge Table enters editing mode (see 

). 

4.  In the editing mode, select MAC Address and enter a MAC address value. 
5. Select Port and assign the current MAC address to the local LAN by entering 

 or to the remote LAN by entering DSL. 

6. Select Save All to save the changes. 
7. Press <Esc> to exit the editing mode. 

 

To remove a MAC address from the table: 
1.  From the Bridge Table, select the MAC address that you intend to remove 

from the static table. 

2.  Enter editing mode, as explained above. 
3.  Enter zeros for the MAC address value and save the change.